100A 48V CE/ISO Wind Solar Hybrid System Controller

(1)Wind/Solar Hybrid (2)More practical (3)life long (4)durable

Product DescriptionThe controller adopts software & hardware PWM mode to control the wind turbine and solar module to charge the accumulator. The optimized charge comp-uting method has improved the utilization efficiency of wind and solar energy. By adopting Maximum Power Point Tracking (MPPT) computing method, the utilization efficiency of the solar module has been improved and solar power system resource has been saved. The controller can indicate various operation statuses such as voltage of the accumulator, voltage of wind turbine, photovoltaic voltage, current of wind

turbine, photovoltaic current, power of wind turbine, photovoltaic power and etc.

Product Features

1.Combination of software & hardware PWM control, which can wholly improve

the stability

2.High current and low ripple output, which can be applied for all the situations with

3.high quality requirements of the power supply.

4.Perfect protective function, which can bring higher reliability for the system.

5.Simultaneous real-time monitoring on multiple control systems can be realized;

6.friendly monitoring interface.

Specification

Rated voltage	48V
Maximum charging current	100A (30A for wind energy and 70A for solar energy ) Optional Configuration
High voltage disconnect	54.8V, default value, set is available
Low voltage disconnect	42.0V, default value, set is available
Start up recovery voltage	50.4V
Temperature compensation	-3mv/cell.
No-load loss	≤40mA
Minimum wiring diameter	10MM2
Circuit voltage drop	<500mv
Reverse polarity protection	Solar reverse and accumulator reverse protection
Reverse discharge protection	Circuit protection, which can prevent the back discharge of accumulator through the solar module.
Short circuit protection	Short circuit protection at the load output terminal of the controller
Ripple voltage	≤200mv

100A 48V CE/ISO Wind Solar Hybrid System Controller